Spray application should be at the same rate.
(64 wet mils) which will provide adequate protection for most surfaces. Equipment manufacturer should be consulted for more complete information.ĬOVERAGE RATE: Apply at 4 gallons per 100 sq. Utilize a standard heavy-duty airless spray pump using heavy duty guns and nozzles. SPRAY APPLICATION: 220 Fibered Emulsion may be easily and efficiently spray applied on large areas with a standard heavy-duty airless spray unit. Make sure to brush into all cracks and crevices. Made from selected asphalt, emulsified with bentonite clay, non-asbestos. Above grade, Henry 789 provides a moisture barrier used for damp-proofing the exterior walls in cavity wall construction. Cover all slots, joints and grooves and apply into all chases and corners.īRUSH APPLICATION: 220 Fibered Emulsion is easily applied with a wide fiber roof brush using wide even strokes, flowing the coating on the surface to obtain a smooth and uniform film. Henry 789 fibered asphalt emulsion damp-proofing is designed for damp-proofing the exterior side of below grade foundations and walls. APOC 302 has excellent weathering qualities and is non-flammable, odorless and bonds to damp. It is also great for use in polyester roofing systems.
#FIBERED ASPHALT EMULSION PROFESSIONAL#
Coating should be continuous and free of pinholes and holidays. APOC 302 PRO-GARD-F Fibered Asphalt Emulsion is a UL Rated, fiber reinforced, professional grade product for coating built-up mineral surfaced, metal, concrete, corrugated and other roof surfaces. If applying two coats, allow the first coat to dry.
Repair all blisters, breaks and cracks with 19 Ultra Rubberized Flashing Cement and 31 Fiberglass Membrane or 34 Asphalt Saturated Cotton Fabric.ĪPPLICATION: 220 Fibered Emulsion is easily applied by brush or spray equipment.
Recommended application temperature is 40☏ to 120☏. The emulsified asphalts are grouped into three types, as follows: Type I, which contains fillers or fibers including asbestos Type II, which contains fillers or fibers other than asbestos and Type III, more Found 15 products. This coating has a semi-paste consistency. SURFACE PREPARATION: All surfaces should be clean, dry, and free from oil, grease, dust, dirt, loose paint or other foreign matter prior to application. An asphalt base, clay emulsion which produces a tight film that gives strength and excellent resistance to water.
0 kommentar(er)
